Do you know the clothing store anti-theft security gate troubleshooting method[Bohang China]

Do you know the clothing store anti-theft security gate troubleshooting method[Bohang China]

Nowadays, with the development of the economy, people are very rich, so they are more willing to choose to use technology to prevent theft.But you will find that the installation of the clothing store anti-theft security gate can not be done once and for all.Sometimes the clothing store anti-theft security gate will have some minor faults, and it can’t be burglarized in time.At this time, you need to learn some troubleshooting methods.If the fault is successfully eliminated, it not only can save time,but also can save maintenance costs.

If the clothing store anti-theft security gate self-chirps,you may check that is there a label within 1.5 meters of the system and near the system power cord?If yes,remove the label,if the system is OK,that is no problem.If no,whether there are large-scale electrical equipment or newly-added electrical equipment within 2 meters of the system accessory, if yes,turn off or remove,if the system is OK,that is no problem.If no,whether the system accessories have construction electricity,is it normal after the construction stops,if it is normal,that is OK,if it still not,you need to find a professional people to solve the problem.

The anti-theft tag,soft labels, especially the anti-theft hard tag distance detection is too close antenna to cause self-sounding. Generally more than 2 meters is better, if the installation spacing is too wide, it is required to be farther.The reason is that device has a certain ability to detect the back zone, and the proximity tag is detected to cause self-sounding.The solution is that remove the near tag. If the site is limited, remove it first to ensure that the detection antenna does not self-sound and gradually put back, so as not to cause self-sounding.

If the clothing store anti-theft security gate does not work,now you need to check is the power turned on?If no,turn on the power,then check the system is OK,if normal,you solve the problem.If the power turned on,you need to check is the system shell indicator light on?If no check if the power and system cables are intact,then connect them,check the indicator light on.

If yes,whether the label is attached to a metal object,if there is a metal object,use other labeled products,try changing a few label ,try again.Make sure There are no large-scale electrical equipment within 3 meters near the system,there is no any construction electrical equipment nearby,Is it normal after the construction stops?If you do these,can not solve the problem,you need to find a professional people to solve the problem.