Views:7 Author:Site Editor Publish Time: 2019-10-29 Origin:Site
How to debug eas anti-theft security system? [Bohang China]
Many merchants choose to install eas anti-theft security system in their own store, a small eas anti-theft security system, playing a key role in the anti-theft of goods. Can effectively carry out all-round anti-theft of goods, but in the process of use, eas anti-theft security system will also be faulty, there are many businesses who have purchased eas anti-theft security system security without warranty service, need eas anti-theft security system manufacturers to repair, then you need to pay labor costs, Increase your business’s budget spend. So, how do we debug eas anti-theft security system?
As one of biggest EAS Manufacturers in China, Bohang offers the full range of EAS products: EAS RF/AM System, RF/AM Hard Tags, RF/AM Labels, RFID Tags, Etc; Equiped with the imported and self-developed automatic producing facilities, Bohang's daily output have reached 100,000 tagging products.
1. First check if the anti-theft antenna is powered. This is the simplest and most common knowledge, but it is also the most overlooked place for many businesses.
2. Use the anti-theft hard tag to test whether the eas anti-theft security system antenna is alarming. Sometimes the test soft tag used may have been decoded; it may be that the soft tag is corrupted. So using hard tag detection is better.
3, to check whether there are large appliances near the antenna, this will affect the correct alarm of eas anti-theft security system, such as: large LED display, freezer, large appliances and so on. Need to move these away.
4. No coil coils are allowed within 10 meters around the antenna. In particular, the network cable of the POS machine is not allowed to form a ring. If the checkout is not repaired or not used, the network cable should be straightened. Terminal boards and 380V strong wires are not allowed in close proximity. When more than one detection port is installed in the same place, the main emission should be started first when the power is turned on, and then the transmission power is turned on. Otherwise it will cause a device alarm.
The above is the introduction of the common faults and debugging methods of eas anti-theft security system, for reference only, we can understand, it is very easy to solve.
With more than 10 years RFID experience, Bohang is with great passion and confidence to become your reliable Supplier.