How to debug the acrylic eas security gate? [Bohang]

How to debug the acrylic eas security gate? [Bohang]

Acrylic eas security gate is an acrylic eas security gate that many merchants will choose. A small acrylic eas security gate plays a key role in the anti-theft of goods. It can effectively carry out all-round anti-theft of goods, but the acrylic eas security gate will also malfunction during use. There are many supermarket acrylic eas security gates purchased by supermarkets without warranty service. If you need acrylic eas security gate manufacturers to repair, you need to pay labor costs.

1. First check if the anti-theft antenna is powered. This is the simplest and most common knowledge, but it is also the most overlooked place in many stores.

2. Use the anti-theft hard tag to test whether the antenna is alarming. Sometimes the test soft tag used may have been decoded; it may be that the soft tag is corrupted. So using hard tag detection is better.

3. to check whether there are large appliances near the antenna, this will affect the correct alarm of the acrylic eas security gate, such as: large LED display, freezer, large appliances and so on. Need to move these away.

4. No coil coils are allowed within 10 meters around the antenna. In particular, the network cable of the POS machine is not allowed to form a ring. If the checkout is not repaired or not used, the network cable should be straightened. Terminal boards and 380V strong wires are not allowed in close proximity. When more than one detection port is installed in the same place, the main emission should be started first when the power is turned on, and then the transmission power is turned on. Otherwise it will cause a device alarm.

The above is the introduction of the common faults and debugging methods of the acrylic eas security gate. It is for reference only. You can understand it and it is very easy to solve.