How to remove supermarket anti-theft security tag without tools [Bohang]

How to remove supermarket anti-theft security tag without tools [Bohang]

The security tag on the clothes is also called the anti-theft security tag. It is composed of steel needle, plastic shell and lock core. The lock cylinder is actually a simple device formed by three steel balls and one steel ring and one spring. The steel ball is normally spring-loaded. In the closed state, the steel ball is tightly fastened in the gap of the steel needle when the steel needle is inserted, and the supermarket anti-theft security tag is mainly opened by the magnetic steel of 8000 GS or more, and the three steel balls holding the steel needle in the lock core are sucked away. Steel needles and steel needles can be smoothly pulled out from the anti-theft security tag. More than 8000GS magnetic magnetic steel is a strong magnetic unlocker commonly used by cashiers.

The above is the principle of the anti-theft security tag, the following describes the method of opening the anti-theft security tag:

1. Look for a magnet to contact with the lock of the anti-theft magnetic clasp. Slightly shake the anti-theft magnetic clasp so that the steel ball can fully contact the magnet to pull out the steel pin. Note that when the magnet is in contact with the lock, do not force the steel pin, because if the steel ball is not When the magnet is attracted, it will only get tighter and tighter. Try to pull out the steel needle after turning it fully.

2. The previous steps are the same as above. When the magnet is in contact with the lock head, the hand holding the anti-theft magnetic clasp is slightly tapped on the magnet and then the anti-theft magnetic clasp is turned, and then the nail is used to pull the steel needle. Because the supermarket anti-theft security tag is recycled for a long time, some steel balls are not so smooth, or they are rusted. The sensitivity has dropped.

3. Violent dismantling, violent dismantling is actually very simple. Just use the position of the fire to lock the lock core. That is, the raised piece uses a tool to open a small gap to take out the spring, then the steel pin is pulled up on the table a few times and gently pulled out. The steel needle is just fine. If it is not convenient to use the position of the fire lock cylinder, when the anti-theft security tag is removed, the anti-theft security tag can be easily opened by the pliers clip, because the small edge is hollow.