Views:0 Author:Allen Publish Time: 2019-07-23 Origin:Site
How to remove the AM eas hard tag [Bohang]
In daily life, many customers will encounter the situation that the sound AM eas hard tag has not been solved when they leave the store. If there is a receipt, they can go to the store and let the service staff help. But if there is no receipt, how to remove the sound AM eas hard tag?
First determine if the label is an ink label, usually white or red and round, usually indicating that it contains red, pink or blue and yellow inks that may be combined. If you try to open it incorrectly, the label will "explode" the thief or your clothes.
Use scissors, screwdrivers, high power magnets, knives or a pair of pliers. Place it on the table with a magnet and place the bottom of the label face down on the magnet. You should hear it click. Operate the pin up and down, the sound AM eas hard tag should come out.
Use a lighter to melt the top of the cone on the ink label. It should take about 15 seconds. Use a knife to scrape off the melted portion of the cone. Then use a knife to eject a ball bearing. Carefully eject the remaining ball bearings. After one comes out, others should be easy to pop up. Then slide the two safety labels of the acoustic AM eas hard tag. Once the ball bearings disappear, the labels should be easily separated.
Use a flat-blade screwdriver on the rectangular label to place the item on the table or floor with the rectangular piece facing up. Place the screwdriver along the edge of the raised area of the label. Press down to pierce the plastic where the head is located. Repeat around the raised area until it can be removed. Pick up the screwdriver and lift a metal arm that you can see to keep the pin in place. The pin should slide over the hole so that you can safely separate the two security labels from the soundproof anti-theft detent.