Views:5 Author:Allen Publish Time: 2020-01-16 Origin:Site
Notes on the use of EAS soft labels[BOHANG CHINA]
As we all know,EAS soft labels is an indispensable part in anti-theft EAS system.If you are the owner, own one or many stores.When recruiting employees,you will train them how to use EAS soft labels.This is a very important thing for the store.
Notes on the use of EAS soft labels:
1,The EAS soft label must be attached to the product to protect the product;
2,EAS soft labels must be placed on the principle of not damaging the product;
3,EAS soft labels cannot be directly affixed to metal, tin foil products, etc .;
4,EAS soft labels cannot be placed overlapping (two or more);
5,The position where the EAS soft label is pasted is as flat as possible, and the curvature of the pasting is as small as possible. It cannot be folded. It is better not to be less than 120 degrees and stick tightly.
Answer the above several notes one by one:
Why can't EAS soft labels be directly attached to metal and foil products?
Explanation: Because metal and tin foil have a shielding effect on EAS soft labels, the signal of the label will be shielded when the soft label is affixed to such goods, which will not serve as an alarm. It ’s like the mobile phone did not use a signal after entering the elevator, so soft labels cannot be directly affixed to metal and foil products.
Why can't EAS soft labels be placed on top of each other (two or more)?
Explanation: Because the frequency of each soft label is 8.2MHZ, and the frequency sent by the detection gate is also 8.2MHZ, the label will alarm when it passes through the detection area, and the frequency of the label will change when the labels overlap, which may be less than Or more than 8.2MHZ, can not reach the standard frequency of the detection gate, so soft labels cannot be placed on top of each other.
Why can't the EAS soft label be folded and bent as small as 120 degrees?
Explanation: Because the structure of the soft label is like a coil, when the soft label is folded or bent at an angle of not less than 120 degrees, the signal of the soft label will be broken and the soft label cannot be alarmed. Therefore, the soft label cannot be folded and bent. May not be less than 120 degrees.