Views:2 Author:Allen Publish Time: 2019-07-17 Origin:Site
What should I pay attention to when installing the clothing anti-theft eas system? [Bohang]
Pay attention to the aesthetics when installing the clothing anti-theft eas system. The clothing store gives people a sense of experience on the tall, so the aesthetic requirements are generally higher when installing the clothing anti-theft eas system. The detection spacing is required to be wide. According to the size of the store and the layout of the doorway, it is generally recommended to install the rear side of the door to the door. A more aesthetically pleasing acrylic antenna mount is recommended if the budget allows.
When the store chooses the clothing anti-theft eas system, it is recommended to use the acoustic magnetic anti-theft system, because the acoustic magnetic anti-theft system has a wider detection interval than the radio frequency anti-theft system, and the label appearance is relatively small, which is more concealed. If the store has a very high aesthetic requirement and a high level of customer satisfaction, it is recommended to use the acoustic magnetic concealed anti-theft system. For relatively small clothing stores or clothing stores with lower unit prices, a more affordable RF anti-theft system can also be selected.
The design principle of the clothing anti-theft eas system system in the clothing store:
1. When designing the plan, we must fully consider the image of the store, and we must ensure the beauty of the store;
2. The installation position of the clothing anti-theft eas system must be reasonable, and the normal circulation of personnel and goods should be guaranteed;
3. Facilitate the handling of the police by security personnel;
4. Ensure that goods are effectively protected;
When installing clothing anti-theft eas systems, clothing stores are generally recommended to be installed on the back side of the door, which does not affect the customer's line of sight, nor does it affect the entry and exit of goods. If there is no special situation, it is generally not recommended to install within 3 meters of the elevator.